|Place of Origin:||China|
|Certification:||KEMA/type test report|
|Minimum Order Quantity:||1pc|
|Packaging Details:||Wooden carton|
|Delivery Time:||5-10 workdays|
|Payment Terms:||L/C, T/T|
|Highest Voltage For Equipment Um (r.m.s.):||17.5, 24, 36||Rated Frequency (fR):||50, 60 Or 50/60|
|Rated Power-frequency Withstand Voltage On Primary:||38, 50, 70||Rated Power-frequency Withstand Voltage On Secondary:||3|
|Number Of CTs And VTs:||3VT+3CT||Standard:||IEC 61869-1:2007、 IEC 61869-2:2012 IEC 61869-3:2011、IEC 61869-4:2013 IEEE C57.13-2016|
36kV Medium Voltage Metering Transformer,
3CT Medium Voltage Metering Transformer,
3VT Metering Box Transformer
Overhead pole mounted primary metering unit
1. Product introduction
1.1 Product type name and model: 17.5-36kV medium voltage overhead column is installed on the metering box with test terminal junction box, JLSZXW8-17.5/24/36 type combined transformer
1.2 Product overview:
This type of metering box is an outdoor dry three-phase primary metering unit. The medium voltage metering transformer is assembled by three single-phase combination transformers. Each single-phase combined transformer includes 1 set of CT coil and 1 set of VT coil. Using alicyclic epoxy resin (CEP) vacuum casting solid encapsulation, has excellent insulation performance and hydrophobicity. The surface is resistant to acid and alkali corrosion, pollution, and UV. It is suitable for outdoor overhead line installation and connection to the public power system. The metering box has all connected the secondary leads of the transformer and gathered them in the junction box with the test switch terminal block. The junction box has a door lock and anti-theft design, which is quick and easy to install. It is suitable for electrical energy measurement, current and voltage measurement in urban and rural power distribution network lines with the highest voltage of 17.5/24/36kV and below.
1.3 Basic parameters:
Highest voltage for
|2.||rated frequency (fR)||Hz||50, 60 or 50/60|
Rated lightning impulse
|kV||95kV,110 kV||125 kV,150 kV||170 kV,200 kV|
|6.||Number of CTs and VTs||pcs||3VT+3CT|
IEC 61869-1:2007, IEC 61869-2:2012
IEC 61869-3:2011,IEC 61869-4:2013
2. Product function and use:
Overhead pole mounted primary metering unit complies with the latest applicable industry standards and local and/or national electrical regulations (IEC, IEEE (ANSI), CAN, GOST, CEF). Used for three-phase overhead power grid energy metering management, distribution network automation management system. The primary side measurement is more accurate, and the power loss of the line can be effectively measured to reduce the loss.
3. Main features of the product:
1. The medium voltage transformer of the metering unit is composed of 3 single-phase combined transformers, which saves installation space. It is convenient and quick to install directly on the pole outdoors.
2. The metering unit is equipped with a junction box that has installed the test terminal block and the lead wire connected to the transformer. The junction box door lock seal structure is designed to prevent electricity theft. At the same time, it can also be equipped with an electric meter box on the column.
3. The meter box body is made of stainless steel or corrosion-resistant low-carbon steel with the same performance, and the sealing design is weatherproof. The surface is coated with anticorrosive paint powder layer, which is resistant to acid and alkali corrosion and UV.
4. The medium voltage combined transformer is insulated with epoxy resin solid encapsulation, and the surface is dirt-resistant and UV-resistant. It has excellent dielectric and mechanical properties, no oil, no gas, no maintenance. It can meet the requirements of safe operation and environmental protection.
5. The CT of the medium voltage combined transformer can be configured with dual ratios. VT can choose anti-short circuit and overload protection design to avoid burning and explosion caused by VT short circuit and overload.
6. One connection uses NEMA contact bar and wiring clamp connection. The terminal block of the corresponding area can be configured according to user requirements, and the lightning arrester can be selected as required.
4. Product technical parameters:
Current transformer specifications
|1.||Rated primary current||5A up to 1200A|
|2.||Rated secondary current||5A或1A|
|3.||Rated Continuous Thermal Current||120%,125%,150%,200%,etc.|
|4.||Rated Short time current (Ith) (thermal 1 second)||80xIpr,100xIpr|
|5.||Rated Dynamic Current (Idyn)||2.5xIth|
|7.||Accuracy Class||0.2S,0.2,0.5S,0.5,1 Metering|
|8.||Instrument Security Factor (FS)||5,10,20|
|9.||Applicable Standard||IEC: 61869-1&2|
Voltage transformer specifications
|1.||Rated primary voltage(V)||
|2.||Rated secondary voltage(V)||100/√3,110/√3, 115/√3, 120/√3, 110,115,120|
|3.||Rated Voltage Factor||
|4.||Standard connection||Y-Y connection|
|6.||Accuracy Class||0.2,0.5,1,3 Metering|
|8.||Applicable Standard||IEC: 61869-1&3|
If the parameters required by the user exceed the range of the above table, it can be determined after consultation with our company.
5. Product dimensions and wiring schematic diagram:
OMA-17.5F,OMA-24F Apearance Dimension Drawing
OMA-36F Apearance Dimension Drawing
Optional meter box 1 (IEC) size can be made as required,
Optional meter box 2 (ANSI) size can be made as required
6. Special requirement
Other specifications are available as per clients’ requests.
Contact Person: Meil
Light Weight Vacuum Resin Cast Current Transformer Fully Enclosed
36kv Indoor Epoxy resin cast current transformer MV LRZ3-36G Chuangyin
MV Current Transformer JDZ11-36 Electrical Indoor /Outdoor Voltage Transformer Autotransformer Type Power Usage
Chuangyin 12kV MV CT Current Transformer for Air Insulation Switchgear
100A/40mA Split Core Current Transformer Open type CT CY-KCT01
Clamp On Split Core Current Transformer Open Distributed Measurement Systems
Epoxy Resin Split Core Current Transducer JDZ-17.5(24) Voltage Transformer Waterproof CT
500A 50/60Hz Open type Split Core Current Transformer Smart Logger
35kV 2# And 3# Plug In euromold termination kit Connector For PT
Epoxy Resin Cast Plug In Bushing GIS IEC 42KV 800A /1250A For Outdoor
42KV 800A /1250A Outdoor GIS Plug In Bushing IEC Epoxy Resin
Indoor Plug In Bushing Connector 35KV En50180-50181 Suitable For GIS panel high accuracy smart grid 11kv 22kv